Ring Floodlight Camera Lights Not Coming On With Motion
If you are an owner of the Ring Floodlight Camera, you may experience a situation where the lights do not come on when motion is detected. This can be frustrating, as the primary purpose of the camera is to provide security by illuminating any motion in its coverage area. Fortunately, there are several ways to troubleshoot and resolve this issue.
Check the Settings
Before you do anything else, check the settings in your Ring app. Open the app and navigate to your Floodlight Camera. Tap on "Device Settings" and then "Light Settings". Make sure that the "Motion-Activated Lights" toggle is turned on. If it is turned off, the lights will not come on when motion is detected.
Adjust the Light Sensitivity
If the "Motion-Activated Lights" toggle is turned on, the next step is to adjust the light sensitivity. Open the Ring app and navigate to your Floodlight Camera. Tap on "Device Settings" and then "Motion Settings". Scroll down to "Motion Zones and Range" and adjust the slider for "Light Sensitivity". If the sensitivity is set too low, the camera may not detect motion and the lights will not come on.
Check the Placement
The placement of your Floodlight Camera can also affect whether or not the lights come on with motion. Make sure that the camera is mounted at the correct height and angle for optimal motion detection. If the camera is too high or too low, it may not detect motion in its coverage area. Additionally, make sure that there are no obstructions blocking the camera's view, such as trees or shrubs.
Check for Interference
If you have other wireless devices in your home, they may be interfering with the signal from your Floodlight Camera. Make sure that your camera is connected to a strong Wi-Fi network and that there are no other devices, such as a baby monitor or cordless phone, that are causing interference. You can also try resetting your router and modem to see if that resolves the issue.
Check the Wiring
If none of the above solutions work, the issue may be with the wiring of your Floodlight Camera. Check to make sure that the wires are properly connected and that there are no frayed or damaged wires. If you are unsure about how to do this, contact a licensed electrician for assistance.
Conclusion
If your Ring Floodlight Camera lights are not coming on with motion, there are several steps you can take to troubleshoot and resolve the issue. Start by checking the settings in your Ring app and adjusting the light sensitivity. Make sure that the camera is properly placed and that there is no interference from other wireless devices. If all else fails, check the wiring or contact a licensed electrician for assistance. With these tips, you should be able to get your Floodlight Camera working properly again.