Raspberry Pi Camera Take Picture Every 10 Seconds
If you're looking for a project that's both fun and educational, then you might want to try using a Raspberry Pi camera to take pictures every ten seconds. This can be a great way to capture time-lapse photography, create a stop-motion animation or simply document a project you're working on. The Raspberry Pi camera is a versatile and affordable option for those who want to experiment with digital photography and video, and it's compatible with most Raspberry Pi models.
What You Need to Get Started
To take pictures every ten seconds using a Raspberry Pi camera, you'll need:
- A Raspberry Pi Single Board Computer
- A Raspberry Pi camera module
- A power source for the Raspberry Pi
- An SD card with Raspberry Pi operating system installed
- A case for the Raspberry Pi (optional)
Step-by-Step Guide
Once you have all the necessary items, you can follow these steps to set up your Raspberry Pi camera and take pictures every ten seconds:
- Connect the Raspberry Pi camera module to the Raspberry Pi board. Make sure the cable is properly seated in the camera and board connectors.
- Power up the Raspberry Pi and make sure it's connected to the internet. You can do this by connecting it to and Ethernet cable or by setting up a Wi-Fi connection.
- Enable the camera on the Raspberry Pi by opening the terminal and entering the following command:
sudo raspi-config. Then, navigate to "Interfacing Options" and select "Camera". Choose "Enable" and then reboot the Raspberry Pi by enteringsudo reboot. - Install the picamera Python module by typing the following command into the terminal:
sudo apt-get install python3-picamera - Open a code editor such as Thonny or IDLE and enter the following Python code:
import timeimport picamerawith picamera.PiCamera() as camera:camera.resolution = (1024, 768)camera.start_preview()time.sleep(2)for i in range(10):time.sleep(10)camera.capture('/home/pi/image%s.jpg' % i)This code uses the picamera Python module to take a series of ten pictures at ten-second intervals. The resolution of each picture is set to 1024x768, but you can adjust it to your liking. The pictures will be saved in the root directory of the Raspberry Pi's SD card.
- Save the code in a file named "take_picture.py" and run it by typing the following command into the terminal:
python3 take_picture.py - Wait for ten seconds and then check the root directory of the Raspberry Pi's SD card. You should see ten pictures with the file names "image1.jpg", "image2.jpg", etc.
Conclusion
The Raspberry Pi camera is a great tool for anyone interested in digital photography and video. By following these steps, you can set up your camera to take pictures every ten seconds and create your own time-lapse photography or stop-motion animations. The possibilities are endless, so have fun experimenting with your new Raspberry Pi camera!
