Skip to content Skip to sidebar Skip to footer
Home / Camera

Rainbow Loom Phone Case With Camera And Charger Hole

Rainbow Loom Phone Case With Camera And Charger Hole

Have you ever thought about creating a unique and personalized phone case using Rainbow Loom? In this article, we will guide you through the process of making a Rainbow Loom phone case with a camera and charger hole. Not only will you be able to showcase your creativity, but also your practicality in having a phone case that suits your needs. So, grab your Rainbow Loom kit and let's get started!

Materials Needed

Rainbow Loom Kit

The following are the materials that you need to create your Rainbow Loom phone case:

  • Rainbow Loom kit
  • Rubber bands (assorted colors)
  • S-clip or C-clip
  • Phone case that fits your phone model
  • Scissors or a cutting tool

Step-by-Step Instructions

Step 1: Creating the Base of the Phone Case

Rainbow Loom Phone Case With Camera And Charger Hole Base

The first thing you need to do is to create the base of the phone case. To do this, you need to use the Rainbow Loom and rubber bands. Follow these steps:

  1. Take your Rainbow Loom board and place it in front of you with the arrow pointing away from you.
  2. Choose a rubber band and stretch it from the first peg to the second peg on the board. Repeat this step to the end of the board.
  3. Turn the board around and repeat the same process on the other side.
  4. Place a new rubber band diagonally from the first peg on the left side to the second peg on the right side.
  5. Place another rubber band diagonally from the first peg on the right side to the second peg on the left side.
  6. Repeat steps 4 and 5 until you reach the desired length of your phone case.
  7. When you are done, remove the rubber bands from the board and put an S-clip or C-clip on each end of the bracelet you just created.

Step 2: Attaching the Base to the Phone Case

Rainbow Loom Phone Case With Camera And Charger Hole Attaching Base

Now that you have created the base of your phone case, the next step is to attach it to your phone case. Follow these steps:

  1. Place your phone case on top of the Rainbow Loom base.
  2. Use a marker or pen to mark the area where the camera and charger holes are located on your phone case.
  3. Remove your phone case from the Rainbow Loom base and cut out the holes that you marked using scissors or a cutting tool. Make sure that the size of the holes matches the size of the camera and charger on your phone.
  4. Place your phone case back on top of the Rainbow Loom base.
  5. Take a rubber band and loop it through the first peg of the Rainbow Loom base and the first hole of your phone case. Repeat this step for each peg and hole that lines up with each other.
  6. Once you have looped the rubber bands through each peg and hole, secure them with an S-clip or C-clip.

Step 3: Creating the Sides of the Phone Case

Rainbow Loom Phone Case With Camera And Charger Hole Creating Sides

The sides of the phone case are important to ensure that your phone is tightly secured. To create the sides, follow these steps:

  1. Place your Rainbow Loom board in front of you with the arrow pointing away from you.
  2. Choose a rubber band and stretch it from the first peg to the second peg on the board. Repeat this step to the end of the board.
  3. Turn the board around and repeat the same process on the other side.
  4. Repeat steps 2 and 3 once more.
  5. Take the first set of rubber bands that you created and wrap it around the phone case and the Rainbow Loom base that you attached earlier. Secure it with an S-clip or C-clip.
  6. Take the second set of rubber bands and wrap it around the first set of rubber bands that you just wrapped around the phone case and the Rainbow Loom base. Secure it with an S-clip or C-clip.
  7. Repeat steps 5 and 6 for the third set of rubber bands.

Step 4: Finishing the Phone Case

Rainbow Loom Phone Case With Camera And Charger Hole Finishing

Now that you have attached the sides of the phone case, it's time to finish it off. Follow these steps:

  1. Take a rubber band and loop it through the two end pegs on the Rainbow Loom base.
  2. Take another rubber band and loop it through the two end pegs on the other side of the Rainbow Loom base.
  3. Join the two rubber bands that you just looped through the end pegs to create a handle for your phone case.
  4. When you reach the desired length for your handle, secure it with an S-clip or C-clip.
  5. Trim off any excess rubber bands with scissors or a cutting tool.

Conclusion

Congratulations! You have successfully created a Rainbow Loom phone case with a camera and charger hole. Not only did you showcase your creativity, but you also created something practical that suits your needs. With this phone case, you can protect your phone while also adding a unique touch to it. So, show off your creation and enjoy using your new phone case!

Meta Description:

Create your own Rainbow Loom phone case with camera and charger hole. Follow our step-by-step guide using materials such as rubber bands, S-clip or C-clip, and a phone case that fits your phone model.

Meta Keywords:

Rainbow Loom, phone case, camera hole, charger hole, rubber bands, S-clip, C-clip, personalized, creativity, practicality, protection.

Related video of Rainbow Loom Phone Case With Camera And Charger Hole

You may like these posts :