Dahua Ip Camera Color Code/Pinout For The Ethernet
If you are planning to install a Dahua IP camera, it is important to understand the color code and pinout for the Ethernet cable. This information will help you properly connect the camera to the network and ensure it functions properly. In this article, we will discuss the Dahua IP camera color code/pinout for the Ethernet in detail.
Understanding the Dahua IP Camera Ethernet Cable
The Ethernet cable for a Dahua IP camera typically has eight wires. These wires are color-coded and should be connected to the corresponding pins on the camera's Ethernet port. It is important to note that the color code may vary depending on the manufacturer. Therefore, it is recommended to check the user manual or contact the manufacturer for the correct color code and pinout for the specific camera model you are using.
Dahua IP Camera Ethernet Cable Color Code
Here is the commonly used Ethernet cable color code for Dahua IP cameras:
- Pin 1 - White/Orange wire
- Pin 2 - Orange wire
- Pin 3 - White/Green wire
- Pin 4 - Blue wire
- Pin 5 - White/Blue wire
- Pin 6 - Green wire
- Pin 7 - White/Brown wire
- Pin 8 - Brown wire
It is important to note that the above color code follows the T568B standard. If you are following the T568A standard, the wire colors for pins 1, 2, 3, and 6 will be different.
Connecting the Ethernet Cable to the Dahua IP Camera
After you have identified the correct color code for the Ethernet cable, you can proceed to connect it to the Dahua IP camera. Here are the steps:
- Locate the Ethernet port on the camera. It should be labeled "LAN" or "Ethernet".
- Insert the Ethernet cable into the port. Make sure that the pins on the cable are aligned with the pins on the port.
- Insert the other end of the Ethernet cable into a network switch or router. Make sure that the other end of the cable is also properly plugged into the device.
- Power on the camera and wait for it to connect to the network.
Once the camera is connected to the network, you can access it using the IP address assigned to it. You can then configure the camera and set it up according to your preferences.
Conclusion
Understanding the color code and pinout for the Ethernet cable of a Dahua IP camera is important if you want to properly connect it to the network. By following the correct color code and pinout and properly plugging in the Ethernet cable, you can ensure that your camera is connected to the network and functioning properly. If you have any doubts or questions about the color code and pinout, it is recommended to consult the user manual or contact the manufacturer for assistance.
